PRODUCT CENTER
CONTACT US
Email:
Whatsapp:
A36 is an American standard carbon structural plate, which is subject to ASTM A36/A36M. This standard is applicable to riveting, bolting and welding structures for bridges and buildings, as well as general purpose structural steel quality carbon steel sections, plates and bars.
X42 pipeline pipe is the pipeline pipe with steel grade of X42. The pipeline pipe is used to transport the oil, steam and water pumped out of the ground to the oil and natural gas industrial enterprises through the pipeline pipe. Pipeline pipe includes seamless pipe and welded steel pipe, with flat end, threaded end and socket end at the pipe end; The connection methods are welding, coupling connection, socket connection, etc.
Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.
S355 Carbon steel plate is a carbon steel used in buildings, bridges, ships, vehicles and other structures, which must have a certain strength and require impact performance and welding performance when necessary.
NM500 steel plate is a high-strength wear-resistant steel plate with high wear resistance.
NM500 wear-resistant steel plate is widely used in engineering machinery, environmental protection machinery, metallurgical machinery, abrasives, bearings and other product parts.
ASTM A283 is a carbon steel plate for general structural use with low to medium tensile strength. The ASTM A283 steel specification covers four structural quality grades of low carbon steel plates for general application, Grade A, B, C, and D.
1020 belongs to high-quality carbon structural steel. Its strength is slightly higher than 1015 steel. It has good toughness, plasticity and weldability. It is rarely quenched and has no temper brittleness. Parts with high cold deformation plasticity, generally used for bending, calendering, edge bending and hammer arch processing, good welding performance of electric arc welding and contact welding, small thickness during gas welding, strict shape requirements or complex shapes are prone to cracks. Machinability cold drawing or normalizing state is better than annealing state, and is often used to manufacture various mechanical parts with low stress and high toughness requirements.
Due to moderate carbon content and good comprehensive properties, the strength, plasticity, welding and other properties are well matched, which is the most widely used. SS400 steel plate is applicable to bridges, ships and vehicles.SS400 is often rolled into wire rod or round steel, square steel, flat steel, angle steel, I-beam, channel steel, window frame steel and other section steel, medium thick steel plate. It is widely used in buildings and engineering structures. It is used for making steel bars or building workshop frames, high-voltage transmission towers, bridges, vehicles, boilers, containers, ships, etc., and is also widely used as mechanical parts with low performance requirements; C. Grade D steel can also be used as some professional steel.
PPGI is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance.
DC01 Galvanized steel coil is used for automobiles, sanitary ware, food machinery, pressure vessels, nuclear power, chemical equipment, elevators, rail transit, machinery manufacturing, structural piping, and architectural decoration.
S235JR is a European standard non alloy structural steel, which is equivalent to the national standard Q235B, that is, carbon structural steel with low carbon content. It is widely used for welding, bolting and riveting structures. It can also be used for building, bridge, ship, vehicle structural parts, manufacturing various tools, cutting tools, molds and measuring tools.
Structural Steel Pipe. A wide range of applications rely on structural steel pipe for strength and stability. Gnee steel supply welded and seamless pipe for structural applications to customers in all industries. As a leading steel pipe supplier, Gnee steel offers a large inventory of pipe and tubing sizes from 1/8” NPS to 48” NPS.
AH36 steel plate is a steel plate with a thickness of no more than 150 mm for the manufacture of ocean going, coastal and inland navigation ships, fishing boats and offshore engineering structures. For steel plates with Z-direction requirements, add Z25 and Z35 to the suffix, which is used as structural steel for high-strength ships and offshore engineering.
PRODUCTS
GET A FREE QUOTE
Copyright © Tangshan Iron & Steel